Jones+Atwood Plastic Granulator 1HP 220V 6.0amp set for 13/64th" or 5.16mm

Description

Jones+Atwood Plastic Granulator 1HP 230V  set for 13/64th" or 5.16mm
This is a used granulator. It is good for smaller pieces. I don't recommend it for stripping copper wires. The machine is currently set for the granular output to be in the 13/64th's of an inch size. You can cut pieces a little smaller by adding shims to the chuck inside the machine (extra shims are included). The motor generates 1HP and spins at 3,500 rpms, which is strong enough to shred most anything you can fit in the hopper: plastic bottles, zip ties, and 3D-Printer residue for example.
The hopper on the top is secured by two fixed screws, and two bolts. It is then locked by a pinion on the "Centurion Safety Switch".  The output chute is in the back and you can put a container or a bucket to collect the granular material.
Shipping is FREE with UPS Ground Service in the lower 48.
I will ship this machine in two separate boxes to save on shipping and save our backs, the entire unit weighs about 80 pounds.
Please check out my perfect feedback and buy with confidence.